48V 40A Scissor Lift Battery Charger
The EPC4840 charger is a high-reliability, highly cost-effective charger designed to be compatible with lead-acid (FLOOD, AGM, gel) pure lead batteries and lithium batteries. It can be installed in both onboard and off-board fixed configurations and comes standard with a CAN bus. The charger supports customizable charging profiles based on customer needs and features high and low voltage protection, with a maximum voltage of 420V. This charger is widely used in aerial work platforms, golf carts, sightseeing vehicles, cleaning equipment, and other similar applications.
| DC Output | 48V40A | 72V28A | 36V50A | 24V60A |
| Maximum DC Output Voltage | 68VDC | 102VDC | 51VDC | 34VDC |
| Maximum DC Output Current | 40A | 28A | 50A | 60A |
| Maximum Output Power | 2000W | 2000W | 2000W | 1500W |
| Minimum Starting Voltage | 6VDC | 9VDC | 4.5VDC | 3VDC |
| Maximum Locking Current | 15A | |||
| Applicable Battery Type | Lead acid (flood, AGM, GEL), Lithium ion | |||
| Reverse Polarity Protection | YES | |||
| Short Circuit Protection | YES | |||
| CAN Communication | YES | |||
| AC Input | ||
| AC Input Voltage Range | TBD | |
| Nominal AC Input Voltage | TBD | |
| Nominal AC Input Frequency | TBD | |
| Maximum AC Input Current | TBD | |
| Nominal AC Input Current | TBD @ 120VAC | TBD @ 230VAC |
| Power Factor | TBD | TBD |
| Regulatory | |
| Efficiency | TBD |
| Safety (LVD) | TBD |
| Emissions (EMC) | TBD |
| Immunity (EMC) | TBD |
| Mechanical | |
| Dimensions | TBD |
| Weight | TBD |
| AC Input Connector | TBD |
| DC Output Connector | TBD |
| Cooling | TBD |
| Environmental | ||
| Enclosure | IP66 | |
| Operating Temperature | -30°C ~ +65°C (power reduced if internal temperature too high) | |
| Storage Temperature | -40°C ~ +70°C | |
